Components > Manufacturer specific drivers

This invisible driver component is intended for connection to "Daikin air conditioners". Depending on the device, individual data points cannot be used.

Global data points of the component

Name	Type	Function
Diagnosis [Text]	Output	Error texts are output here. These can be displayed e.g. with the component "Protocol window". Attention: Diagnosis or debug outputs are only provided for the case of an error. Please use only after consultation with the support team! If used, these can considerably impair the performance of the service
Extended diagnosis	Input	(De)Enables the extended debug output. Attention: Diagnosis or Debug - outputs are only provided for the case of error. Please use only after consultation with the support team! If used, these can significantly affect the performance of the service
Driver On/Off	Bidirectional	(De)Activating the component
Connection status	Output	Shows whether the connection to the device exists (true) or not (false).

Data points of the Daikin air conditioning systems

Name	Type	Function
Fan movement	Bidirectional	The fan movement can be controlled either directly via an on/off signal or via an input at the corresponding data point: 0 = Off 1 = Vertical fan movement 2 = Horizontal fan movement 3 = Horizontal and vertical fan movement
Fan rate	Bidirectional	The fan rate can be controlled either directly via an on/off signal or via an input at the corresponding data point: A = car B = Silent mode (Not supported by Daikin Emura FVXS) 3 = Level 1 4 = Level 2 5 = Level 3 6 = Level 4 7 = Level 5
Mode	Bidirectional	The mode can be controlled either directly by an on/off signal or by an input at the corresponding data point: 0 = Auto (temperature range 18-31°C) 1 = Auto (temperature range 18-31°C) 2 = Dehumidify 3 = Cold (temperature range 18-33°C) 4 = Hot (temperature range 10-31°C) 6 = Ventilation 7 = Auto (temperature range 18-31°C)
Power	Bidirectional	This can be used to switch the air conditioning on and off
Target Humidity	Bidirectional	Possibility to set the target humidity for the current mode (not supported by FTXG-L and FVXS).
Target temperature	Bidirectional	Depending on the mode, the target temperature can be set here. The input range is between 10 and 41°C.

Properties of the component

Name	Standard	Function
IP address		Enter the IP address of the Daikin air conditioner.
Status Check Interval [s]	1800	Setting for the update time in seconds.
Driver On/Off		(De)Activate the component.

Compatible devices:

wireless adapters	device name	device series
BRP069B42	Urura Sarara	FTXZ-N
BRP084A42-1	Stylish	CTXA-A; FTXA-A; FTXA-B*
BRP069B41	Emura	FTXJ-M*
BRP069B41	Perfera	CTXM-N; FTXM-N
BRP069B45	Comfora	FTXP-M
BRP069B45	Sensira (Austria)	FTXF-A
BRP069B45	Siesta (Germany)	ATXF-A

Daikin Air Conditioning

Daikin Air Conditioning