The graphic logic is an unVisiblee server component and is used to implement control and control tasks. Any number of inputs and outputs of different types of data points can be used.
The component is not visible on the interface in the client.
Properties
Name |
|
function |
|---|---|---|
Logic editor |
|
This opens the Logic Editor for creating the functionality. |
Cyclical calculation interval [ms] |
500 |
Define here the calculation interval for the cyclical calculation. |
Cyclical calculation |
|
If the checkmark is set, the calculation is cyclical. If the tick is not set, the calculation is event-driven. |
Logic On/Off |
|
If this parameter is set, the calculation of logical functionality starts. If the parameter is not set, the graphic logic will not work. |
automatically sort |
|
With this option, the gates are automatically sorted when the logic editor is closed. |
Password |
|
A password can be used to protect the processing of the component. |
General
The graphic logic basically differentiates between two operating modes: the cyclic and the
event-driven execution. The selection takes place in the properties over the
Parameter "Cyclic calculation". If the tick is set, the cyclic operating mode is selected,
otherwise the event-driven.
The logic must always be activated via the "Logic on / off" parameter, otherwise it will work
Not. Check the box when you have finished creating the logic circuits.
Cyclic mode
Classic logic modules in the area of the EIB / KNX work with cyclic calculation. It must
not to pay attention to an ascending order of the logic components.
Event-driven mode
The calculation only works if the components are sorted in the correct order.
The sorting (numbering of components) must be done from the inputs through the components
the outputs take place. Event-driven processing is the fastest way of doing the logic
to calculate, since immediately at a change at one of the inputs the chain of functions over the gates
calculated to the output and output directly.
Proper sorting
If the order is not ascending, from the input to the gate and then to the output, it works
the calculation is not.
Wrong sorting
feedback
In order to be able to give signals within the logic to the rear gates, the cyclic operating mode must
to get voted. In case of event-driven execution and / or in general, feedback can take place
via the external communication ports of the graphic logic. Connect to that
desired output with the required input. It will be a connection in the form of a network
created.
simulation
The graphical logic has a built-in editor simulator, d. H. You can the
Test developed circuits within a simulation window before putting them into operation
go. In the simulator, time sequences can be tested in a time-lapse method.