Components > Multimedia > Lightware MX2

This driver is used to connect the Lightware MX2 devices.

Global data points of the component

Name	Type	Function
Diagnosis [Text]	Output	Error texts are output here. These can be displayed e.g. with the component "Protocol window". Attention: Diagnosis or debug outputs are only provided for the case of an error. Please use only after consultation with the support team! If used, these can considerably impair the performance of the service
Extended diagnosis	Input	(De)Enables the extended debug output. Attention: Diagnosis or Debug - outputs are only provided for the case of an error. Please use only after consultation with the support team! If used, these can significantly affect the performance of the service
Driver On/Off	Bidirectional	(De)Activate the component
Connection status	Output	Shows the connection status as On/Off.
Send/Delete Queue	Input	If switching commands are queued (see below), they can be sent together (for simultaneous switching of the outputs). For this purpose, a TRUE must be sent to this input. If a FALSE is sent to the input, the queue is deleted.

Dynamic data points of the component (input)

Name	Type	Function
Output to all outputs	Input	If this input is triggered, the input is output on all outputs.
Current output	Folder	For status output, on which output(s) this input (X) is output.
Output	Output	Number of the output on which this input is displayed (Attention: As an input can be displayed on several outputs, only the first output on which input X is displayed is output here)
Output 1, ...	Output	There is one such data point for each defined output. This data point is used to determine whether input X is output to output Y.
Select output	Folder	to specify the output to which the input is to be output (Attention: Since an input can be output to several outputs, old specifications remain active unless they are explicitly overwritten. If, for example, input 1 is first switched to output 1 and then to output 2, the first circuit on output 1 remains active)
Output	Input	Number of the output on which input X is to be output
Output (queue)	Input	see below
Output 1, ...	Input	If this data point is triggered, input X is (additionally) output to output Y
Output 1, ... (queue)	Input	see below

Dynamic data points of the component (output)

Name	Type	Function
Current input	Folder	For status output ,which input is output on this output Y)
Entrance	Output	Number of the input that is output on this output Y
Input 1...	Output	For each defined input there is one such data point. This data point is used to determine whether input X is output on this output Y.
Select input	Folder	to determine which input should be output to this output Y
Entrance	Input	Number of the input to be output to this output Y
Input (queue)	Input	see below
Input 1...	Input	If this data point is triggered, input X is output on this output Y
Input 1, ... (queue)	Input	see below
Lock	Input	The input (number) currently output on this output can no longer be changed.
lock status	Output	Status, whether the input is blocked or not
Mute	Input	Switches the output (number) silently.
Mute Status	Output	Status, whether the output is silent or not.

Queue:

If a data point marked with (queue) is used, the respective switchover is not performed directly, but is stored in a queue which is only sent to the device when explicitly triggered (send/delete global data point queue). This is used for simultaneous switching of the outputs to avoid visible delays of the individual outputs.

Properties of the component

Name	Standard	Function
number of inputs	0	Specifying the number of media inputs
number of outputs	0	Specifying the number of media outlets
Server		The IP address of the Lightware MX2 device is entered here
Port	10001	Setting for the communication port
Protocol	LW2	Selection between protocol "LW2" and "LW3"
Status query Interval	10	Specifies the time interval for the update.
Driver On/Off		(De)Activate the component.