|
<< Click to Display Table of Contents >> Navigation: Components > Control, logic & time > Time stamp |
The time stamp is an unVisiblee server component with the task of capturing the last time an incoming signal arrives on a network. So it can be seen when e.g. a command has last arrived or a user has last triggered a command.
Note: The display format can be set on the component. If the property field for the display format is empty, the default is: MM.dd.yyyy HH: mm: ss.
Data points of the component
Name |
Type |
function |
|---|---|---|
Input |
Input |
If an arbitrary signal is applied to this input, the time stamp is triggered. |
time stamp of last Input |
Output |
Here, the time is output in the entered display format. In addition, there is the option of outputting milliseconds via the format extension ".ms". |
Properties
Name |
|
function |
|---|---|---|
Display format |
|
Here, the display format for the last trigger time is selected. If the field is empty, the default is dd.MM.yyyy HH: mm: ss active. dd.MM.yyyy for day / month / year, HH: mm: ss for hour / minute / second. The following applies: dd = day, mm = month, yyyy = year. Further: HH = hours, mm = minutes, ss = seconds, .ms = millisecond. |
Only if value changed |
|
If this parameter is set, the time stamp will only be triggered if the newly created value at the input is not identical to the last one. |