|
<< Click to Display Table of Contents >> Navigation: Components > Sensors > Controller |
The slider is a Visible Client component. It is used for display and operation.
The controller can output a wide variety of values as control signals or display values. It is usually used in conjunction with 8-bit brightness values, dimmed consumers or as a temperature setpoint.
Values are generally sent when the controller is released (mouseUp).
The display styles of the controller are identical to the setting in the editor only in the PC client. On Android and iOS devices it can come here to the deviations. Not all styles are available for the mobile clients. If you want to achieve exactly the same appearance, please use the animated slider with specific graphics.
An on / off command at the data point "Visible" allows the component to be shown or hidden (Visible / Unvisible). An on command switches the component Visible, an off command unvisible.
Data points of the component
Name |
Type |
function |
|---|---|---|
Lock operation (display only) |
Input |
If this input is not used, the component can be operated normally. If the input is connected with an on-signal, the component will be locked can not be operated. It only has display function. The locked state of a component is displayed, with a padlock sign on a slightly gray background. |
Mouseover |
Output |
Sends out an On signal, if you hover over the component with the mouse pointer. |
Visible |
Input |
If this input is not used, the component is always visible. The component can be made invisible with an off signal on this datapoint and visible with an on-signal on this data point. |
Status input |
Input |
the Statusinput allows the setting of the state without a retrigger of the controller (status feedback) |
Input |
||
Value |
Bidirectional |
This data point is used to send the current value and / or to receive a value. |
Properties
Name |
|
function |
|---|---|---|
Look: |
|
|
- Controller Skin |
none |
select from different controller skin, dimmer, shutter, blind, temperature, volume |
- Background Indicator |
|
Color setting for the background indicator |
- Buttons |
|
Some displays may show plus-minus buttons to allow step-by-step input. |
Einstellungen: |
|
|
- Value at maximum setting |
255 |
Here, the value is selected which is output when the controller has been moved to the uppermost position (rotation 0 °). |
- Value at minimum setting |
0 |
Here, the value is selected which is output when the controller has been moved to the bottomrmost position (rotation 0 °). |
- Lock operation (display only) |
|
If this parameter is set, the component can not be operated. It then only has display function. |
- Send interval [ms] |
2000 |
After this time, the current value at the "Value" data point is sent with continuous operation (MouseDown). Otherwise, the value will generally be sent when the controller is released (MouseUp). |
- Change Display only via status input |
|
Display status (On / Off / Undefined) is only changed via the signal at status input if this parameter is set. |