|
<< Click to Display Table of Contents >> Navigation: Components > Manufacturer specific drivers > Salto |
The invisible Salto driver allows access to the door control. This allows the imported devices to be monitored and controlled.
Data points of the component
Name |
Type |
Function |
|---|---|---|
Synchronize user |
Input |
Here the readout of the users created in Salto can be triggered. Otherwise, it is performed at the start and cyclically at the set interval. |
Diagnosis [Text] |
Output |
Attention: Diagnostic or debug outputs are only intended for use in the event of an error. Please use only with consultation of the support team! If used, they can significantly affect the performance of the service. |
Extended Diagnosis |
Input |
(De)Activates the extended debug output. Attention: Diagnostic or debug - outputs are only intended for error cases. Please use only after consulting with the support team! If used, they can significantly affect the performance of the service. |
Event Log |
Output |
Output of the transmitted raw data. |
Dynamic |
Folder |
Contains the imported devices and their data points. |
Last Event |
Folder |
Output of the last event, divided into the different data points. |
Export Log Events (All) |
Input |
All stored events will be exported. C:\ProgramData\Alexander Maier GmbH\EisBaer 3.0\SALTO\Logs\*.csv |
Export Log Events (User) |
Input |
Events of a specific user are exported. |
Export Log Events (Keys) |
Input |
Events of a specific key are exported. |
Driver On/Off |
Bidirectional |
Switch driver on or off. |
Properties of the component
Name |
Default |
Function |
|---|---|---|
Connection |
0.0.0.0 |
Enter the connection settings. See below for details. |
Cyclic user synchronization [h] |
1 |
Readout interval of the users created in Salto, in hours. |
Salto Entities |
0 |
Opens the import dialog for the Salto devices. |
Driver On/Off |
|
(De)activates the component. |
Connection:
SHIP Server IP |
IP of the Salto SHIP server (software installed on a PC) |
Port (STP) |
Communication port of the SHIP server (default: 9999) |
Encoding |
Switching between ISO and UTF |
Event polling interval [s] |
Specifies the refresh interval of the event history in seconds. |
Use event stream |
If the event stream is licensed via Salto, the event server can be activated. A local interface (IP on the polar bear PC) must then be specified here, on which the events are retrieved from Salto. If the textbox remains empty, the event receiver listens on all interfaces |
Local server IP |
EisBaer server IP on which the event server is active. |
Local event server port |
Communication port for the event server (default 8889). |