|
<< Click to Display Table of Contents >> Navigation: Components > Sensors > Touch Value Editor |
A numerical value can be entered via this component. This is then output directly in the "DataPointValue, Floating Comma 64-bit" format.
Via "WPF-Theme" the appearance of this component can be varied.
Data points of the component
Name |
Type |
function |
|---|---|---|
Lock operation (display only) |
Input |
If this input is not used, the component can basically be operated. If the input is connected with an on signal, the component can not be operated. It then only has display function. |
Mouseover |
Output |
This output can be used to start an event when the object is moved by mouseover. |
Visible |
Input |
With an off-signal the component unVisible and with an on-signal Visible is switched. |
Status input |
Input |
This input can be used to change the display value of the component. Here is e.g. the signal of an active feedback switched on. |
Trigger send value |
Input |
The entered value is sent with an ON signal. |
Text colour [ARGB-HEX] |
Input |
This data point can be used to change the font color. The desired color is passed as a character string (hexadecimal value without #). It is possible to copy the color from the brush editor. |
Input |
||
Value |
Bidirectional |
This data point is used to send the current value and / or to receive a value. |
Send value |
Input |
The entered value is sent with an ON signal. |
Properties of the component
Component name |
Standard |
Function |
|---|---|---|
Maximum input value |
100 |
Specifies the maximum possible input value. If a larger value is entered, the output is limited to this number. |
Minimum input value |
0 |
Specifies the minimum possible input value. If a smaller value is entered, the output is limited to this number. |
Send status |
|
Sends the last value at server start to the network. |
Send value if focus is lost |
|
Sends the set value if the touch value input is no longer selected. |
Send value after input |
X |
If active, the value is sent by pressing the "Enter" button or the "=". If this option is not active, the value is only sent when an ON or OFF signal is sent at the "Send value" data point (depending on the setting). |
Send value when ON |
X |
Activate to trigger a value transmission with an ON edge. If deactivated, it reacts to OFF edges. |
Factor |
1 |
Transmitted values are multiplied by the set factor. The incoming value is divided by the factor so that values (incoming) are displayed correctly again via the bidirectional data point. |
Formatting |
##0 |
see Formatting |
Auto delete on input |
|
If a new value is entered via the dropdown, the value is set to zero to facilitate the new value entry |
Lock operation (display only) |
|
If this parameter is set, the component cannot be operated. It then only has a display function. |
Under Formatting, "# # 0" specifies the type and length of possible input. For example, for a number greater than 999, the formatting must be extended to # # # 0.