Hello,
I have a tip and a problem simultaneously:
Tip:
I have between 11 and 14 rolladen per storey. In order to control each rolladen seperately and keep the workspace clean at the same time, I made a panel with the control buttons for each rolladen, which can be individually blended in by clicking on the appropriate window icon. In addition, I have a master control which to open or close all the rolladen at the same time. Now here's the trick: after opening several control panels, the workspace is pretty cluttered and closing each one seperately gets old fast. So I placed a 'sequenz' in the page and connected one output to each of the nets that control the panel visibility. I then connected the input to the master control visibility net. all the outputs are set only to send a 'off' signal when the sequence turns on. And there you are: when I open the master control panel all the other panels close automatically.
To keep the panels from being turned back on while the master control panel is still open i added one more output which is connected to the 'sperren' input of ALL of the window icons. this output sends an 'on' at turnon and an 'off' at turn off.
Works great!
Now my problem:
In the helpfile, the number of possible sequence outputs is show to be 32bit. (a very large number) One can set more than the default 10 (i.e. 15) and can also set the sequences for all the outputs. Unfortunately, only the values for the first 10 outputs are actually sent. In other words, with 15 outputs only the values for outputs 1-10 are sent, outputs 11-15 do absolutely nothing.
I have prepared a demo file which I can upload or mail to interested persons. This goes for those who want to see how to do it, as for the support team, concerning the bug.
mfg
DanielBr
