Single request

Input

Triggers a single query from the CMS system

Cyclic request

Bidirectional

Starts / stops the cyclical data query.

Cyclic request - delay [s]

Bidirectional

Setting the pause time between 2 queries in seconds

Detailed diagnosis

Bidirectional

(De)Activates the extended debug output. Attention: Diagnostics or debug outputs are only intended for use in the event of an error. Please only use them after consulting the support team! If used, these can significantly impair the performance of the service

Diagnosis [Text]

Output

Attention: Diagnostics or debug outputs are only intended for errors. Please only use after consulting the support team! These can significantly affect the performance of the service when used.

Reset energy groups

Input

Resetting the energy values.

Max values reading interval [min]

Input

Setting the reading interval in minutes for the voltage peaks

Reset min / max values

Input

Reset the min / max values for each channel.

Voltage L1-L2 [V]

Input

Input for the measured voltage on the corresponding path.

Voltage L1-N [V]

Input

Input for the measured voltage on the corresponding path.

Voltage L2-L3 [V]

Input

Input for the measured voltage on the corresponding path.

Voltage L2-N [V]

Input

Input for the measured voltage on the corresponding path.

Voltage L3-L1 [V]

Input

Input for the measured voltage on the corresponding path.

Voltage L3-N [V]

Input

Input for the measured voltage on the corresponding path.

Strom Sum L1 [A]

Output

Returns the total current of the phase

Strom Sum L2 [A]

Output

Returns the total current of the phase

Strom Sum L3 [A]

Output

Returns the total current of the phase

Strom Sum N [A]

Output

Outputs the total current of the neutral conductor

Connection state

Output

Displays whether the connection is established (true) or not (false).

Trigger holding

Input

(De) Activate value storage.

Channels

0

One channel can be created here for each sensor.

Connection

Serial...

Setup for communication (Modbus Serial / Modbus TCP)

Cyclic request - delay

1

Setting the pause time between 2 queries in seconds

Cyclic request  - Autostart

Starts / stops the cyclical data query.

Voltage L1-N [V]

230

Specify the voltage for the calculation if there are no measured values.

Voltage L2-N [V]

230

Specify the voltage for the calculation if there are no measured values.

Voltage L3-N [V]

230

Specify the voltage for the calculation if there are no measured values.

Voltage L1-L2 [V]

400

Specify the voltage for the calculation if there are no measured values.

Voltage L2-L3 [V]

400

Specify the voltage for the calculation if there are no measured values.

Voltage L3-L1 [V]

400

Specify the voltage for the calculation if there are no measured values.

Max-Value read interval [min]

1

Readout interval in minutes for the voltage peaks

Use old library

This option realises the processing of Modbus data via a newer API.

Output NULL to network in the event of an error

X

Registers that cannot be read or if there is another error, the outputs are set to NULL. This clears the value displays.

Driver On/Off

(De) Activate value storage.