|
<< Click to Display Table of Contents >> Navigation: Components > Manufacturer specific drivers > ABB M4M |
Data points of the component
Name |
Type |
Function |
|---|---|---|
Single query |
Input |
Triggers a single query of the M4M system |
Query cyclically |
Bidirectional |
Starts/stops the cyclical polling of data. |
Query cyclic - Pause [s] |
Bidirectional |
Setting the pause time between 2 queries in seconds |
Diagnosis [Text] |
Output |
Attention: Diagnosis or Debug - outputs are only provided for the case of an error. Please use only after consultation with the support team! If used, these can significantly affect the performance of the service. |
Extended diagnostics |
Input |
(De)Activate the extended diagnostics. |
Driver On/Off |
Bidirectional |
Switch driver on or off. |
Connection status |
Output |
Indicates whether the connection exists (true) or not (false). |
Properties of the component
Component name |
Standard |
Function |
|---|---|---|
Channels |
0 |
The devices used are created in this editor. |
Connection |
|
Selection of the communication type(Modbus-Serial / Modbus-TCP) |
Read out scaler registers |
|
The registers for scaling are only read out by setting this option. |
Query cyclically - Pause [s] |
1 |
Setting the pause time between 2 queries in seconds |
Query cyclically - Autostart |
set |
Starts/stops the cyclical query of the data. |
Use old library |
|
This option is used to process the Modbus data via a newer API. |
Output NULL to network in case of error |
X |
Registers that cannot be read or if there is another error, the outputs are set to ZERO. This clears the value displays. |
Driver on/off |
|
Switch driver on or off. |