|
<< Click to Display Table of Contents >> Navigation: Components > Manufacturer specific drivers > AVM home automation |
The AVM driver is an invisible server component with the possibility to control the connection of the Fritz Home Automation devices. To use this driver, the AVM devices must be taught-in on the Fritz!Box.
Data points of the component
Name |
Type |
Function |
|---|---|---|
Diagnosis [Text] |
Output |
Attention: Diagnostic or debug outputs are only intended for use in the event of an error. Please use only after consultation with the support team! If used, these can significantly affect the performance of the service. |
Dynamic |
Folder |
Contains the data points of the connected devices. These vary depending on the type of device. |
Advanced Diagnostics |
Input |
Extends the output at the diagnosis data point to include further information. Attention: Diagnostic or debug outputs are only intended for use in the event of an error. Please use only after consultation with the support team! If used, these can significantly affect the performance of the service. |
Driver On/Off |
Bidirectional |
Turn driver on or off. |
Connection status |
Output |
If the connection to the FritzBox was established, an ON signal is output. If the connection is interrupted, an OFF signal is output. |
Properties of the component
Name |
Standard |
Function |
|---|---|---|
Connection |
|
Enter the IP address of the device on which the AVM Smart Home devices are registered and the account data. The update interval is set in seconds. |
Channels |
|
In the Channel Editor, the Smart Home devices are imported from the Fritz!Box and displayed. |
Driver On/Off |
OFF |
Defines whether the driver is automatically activated at the start of the project. |
Note:
The feedback for colour temperature is only output if it is also in Colortemp mode. The same applies to saturation.
Current colour mode: current_mode: string 1(HueSaturation), 4 (colour temperature) or ""(empty → unknown)
Supported functions:
AVM Button
AVM radiator controller
AVM energy meter
Temperature sensor
AVM switchable socket
Device/socket/lamp/actuator that can be switched on/off
Device with adjustable dimming, height or level
Lamp with adjustable colour/colour temperature
Roller shutter (blind) - up, down, stop and level 0% to 100%