Byte-Splitter

 

 

<< Click to Display Table of Contents >>

Navigation:  Components > Control, logic & time >

Byte-Splitter

 

 

The byte splitter converts an 8-bit numerical value applied to the input into 8 individual output bits. The output is of the type "on / off". Thus, one could, for example, display an 8-bit numerical value in binary code.

 

Data points of the component

Name

Type

function

Bit 0

Output

Output of Bit 0

Bit 1

Output

Output of Bit 1

Bit 2

Output

Output of Bit 2

Bit 3

Output

Output of Bit 3

Bit 4

Output

Output of Bit 4

Bit 5

Output

Output of Bit 5

Bit 6

Output

Output of Bit 6

Bit 7

Output

Output of Bit 7

Byte

Input

The byte to be converted can be received here.

 

Properties of the component

Component name

Standard

Function

Sequence

Any

The outputs are set in the selected sequence.

Pause [ms]

0

Delay time in milliseconds for switching between ON and OFF signal outputs. This refers to the sequence ON/OFF or OFF/ON

Changes only

 

If this option is set, the outputs are only switched if the status changes. Otherwise, the states are retriggered.

 

 

Example:

 

Input = 170 (Bin 0101 0101

With the sequence"First OFF then ON", BIT 0, 2, 4, 6 is set to OFF. Then the pause [ms] is waited for. BIT 1, 3, 5, 7 are then set to ON.

In the"First ON then OFF" sequence, BIT 1, 3, 5, 7 are set to ON. The pause [ms] is then waited for. BIT 0, 2, 4, 6 are then set to OFF.

With the