|
<< Click to Display Table of Contents >> Navigation: Components > Sensors > Hand-Automatic Switch |
A rotary switch for the switching states On / Off / Automatic. Different types of data can be sent here, each for "On" and "Off" per switch position.
Data points of the component
Name |
Type |
function |
|---|---|---|
0 - Value On |
Output |
Returns the corresponding value on defined in the component's settings. |
0 - Value Off |
Output |
Returns the corresponding value off defined in the component's settings. |
1 - Value On |
Output |
Returns the corresponding value on defined in the component's settings. |
1 - Value Off |
Output |
Returns the corresponding value off defined in the component's settings. |
Auto - Value On |
Output |
Returns the corresponding value on defined in the component's settings. |
Auto - Value Off |
Output |
Returns the corresponding value off defined in the component's settings. |
Lock operation (display only) |
Input |
If this input is not used, the component can basically be operated. If the input is connected with an on signal, the component can not be operated. It then only has display function. |
Mouseover |
Output |
This output can be used to start an event when the object is moved by mouseover. |
Visible |
Input |
With an off-signal the component unVisible and with an on-signal Visible is switched. |
Status Value |
Bidirectional |
This data point is used to send and / or receive the current value. |
Status input - 0 |
Input |
The display of the component switches to 0 when the corresponding switching status has been reported back from the bus. |
Status input - 1 |
Input |
The display of the component switches to 1 if the corresponding switching status has been reported back from the bus. |
Status input - Auto |
Input |
The display of the component switches to Auto if the corresponding switching status has been reported back from the bus. |
Input |
Properties
Name |
|
function |
|---|---|---|
0 - Value On |
|
Specifies the set data type / value for this input / output. |
0 - Value Off |
|
Specifies the set data type / value for this input / output. |
1 - Value On |
|
Specifies the set data type / value for this input / output. |
1 - Value Off |
|
Specifies the set data type / value for this input / output. |
Auto - Value On |
|
Specifies the set data type / value for this input / output. |
Auto - Value Off |
|
Specifies the set data type / value for this input / output. |