Icon

Name

Description

Text

The text provides an outline and commentary on the logic layouts.

Input

The input is connected internally to the logical elements. At the

component it provides a communication port to link with networks. It

can have different data types.

Output

The output is connected internally to the logical elements. At the

component it provides a communication port to link with networks. It

can have different data types.

OR

An OR gate has the value 1 if at least one input has the value 1.

AND

An AND gate has the value 1 if all inputs have the value 1.

Exclusive-OR

An exclusive OR gate only has the value 1 if an odd number of inputs

has the value 1.

Gate

A gate has an input, an output and a control input. A gate may pass, if it

is released at an event at the input, a value from the input to the

output. If blocked, then there is no reaction.

Comparator

A comparator has two inputs and one output. It compares two input

values with an adjustable comparison operator with another. When the

comparison condition is satisfied, the output is 1, not satisfied, is 0.

Arithmetic Operator

An arithmetic operator performs basic arithmetic functions with two

inputs and pushes the result to the output.

Converter

A converter converts the value at the input to any format at the output.

Delay

The input signals are delayed at the output.

Timer

With an event at the input a timer sends the value of the input with an

on/off switch delay to the output. The output can be reset with a pulse

function and an input and output signal after a set period of time.

Filter

A filter can pass values at the input with a low-, high-and bandpass

function to the output.

Activator

With the activator turning it is possible to turn the Grafical Logic on and

off the from an external connection.

Inverter

The inverter has an output of 0 if the input is at 1.

Switch

The Switch selects one of two inputs with a control input and passes the

input value to the output.

MinMax-Finder

The MinMax Finder looks for the smallest and the largest adjacent value

to all 10 inputs and returns the smallest value at the output MIN and

the largest at the output MAX.

Counter

The counter counts the rising edges or pulses at the CLK input. An input

count direction (up/down) can be selected. A reset sets the output

value to 0.

RS-FlipFlop

The gate is a reset-set flip-flop. If the set-input is 1, the A output is set

to 1. If the reset input is 1, the A-output is set to 0. The reset input has

higher priority than the set input.

PID-Controller

The gate is PID control function. It consists of a proportional, an integral

and a differential portion. The single controller parts may be selected or

deselected.

Oscillator

The oscillator generates periodic rectangular signals. The cycle time (Z)

and the pulse width (P) are internally and externally adjustable.