|
<< Click to Display Table of Contents >> Navigation: Components > Sensors > RTR-Operation Mode Switch |
A rotary switch for the comfort / night / protection and standby switching states. Different types of data can be sent here, each for "On" and "Off" per switch position.
Status values:
1 comfort
2 standby
3 night
4 protection
Data points of the component
Name |
Type |
function |
|---|---|---|
Lock operation (display only) |
Input |
If this input is not used, the component can basically be operated. If the input is connected with an on signal, the component can not be operated. It then only has display function |
Comfort - Value On |
Output |
Returns the corresponding value defined in the component's settings. |
Comfort - Value Off |
Output |
Returns the corresponding value defined in the component's settings. |
Mouseover |
Output |
This output can be used to start an event when the object is moved by mouseover |
Night - Value On |
Output |
Returns the corresponding value defined in the component's settings. |
Night - Value Off |
Output |
Returns the corresponding value defined in the component's settings. |
Protection - Value On |
Output |
Returns the corresponding value defined in the component's settings. |
Protection - Value Off |
Output |
Returns the corresponding value defined in the component's settings. |
Visible |
Input |
With an off-signal the component unVisible and with an on-signal Visible is switched. |
Standby - Value On |
Output |
Returns the corresponding value defined in the component's settings. |
Standby - Value Off |
Output |
Returns the corresponding value defined in the component's settings. |
Status Value |
Bidirectional |
This data point is used to send and / or receive the current value. |
StatusInput - Comfort |
Input |
The display of the component switches to Comfort when the corresponding switching status has been reported back from the bus. |
StatusInput - Night |
Input |
The display of the component switches to Night when the corresponding switching status has been reported back from the bus. |
StatusInput - Protection |
Input |
The display of the component switches to Protection when the corresponding switching status has been reported back from the bus. |
StatusInput - Standby |
Input |
The display of the component switches to Standby when the corresponding switching status has been reported back from the bus. |
Input |
Properties
Name |
|
function |
|---|---|---|
Comfort - Value On |
|
Specifies the set data type / value for this input / output. |
Comfort - Value Off |
|
Specifies the set data type / value for this input / output. |
Standby - Value On |
|
Specifies the set data type / value for this input / output. |
Standby - Value Off |
|
Specifies the set data type / value for this input / output. |
Night - Value On |
|
Specifies the set data type / value for this input / output. |
Night - Value Off |
|
Specifies the set data type / value for this input / output. |
Protection - Value On |
|
Specifies the set data type / value for this input / output. |
Protection - Value Off |
|
Specifies the set data type / value for this input / output. |