|
<< Click to Display Table of Contents >> Navigation: Components > Display and Signal > Circular Gauge |
Like the Linear Scale, the Angle Plate component is used to display specific parameters or values in a circle shape. The minimum / maximum value can be set in the Properties under Appearance.
Under "Appearance" the minimum and maximum scale values, as well as the different ranges in value and color, can be defined. For larger numbers, the clarity can be improved by a factor. In the line "unit" any text can be inserted, which can then be seen under the angle plate.
In addition, 4 different display modes are available, which can be set via "Display style".
Factor = Incoming values are multiplied by the factor.
Data points of the component
Name |
Type |
function |
|---|---|---|
Range 1 |
Output |
If the input value is in this range, the output is set to 1 / On.. |
Range 2 |
Output |
If the input value is in this range, the output is set to 1 / On. |
Range 3 |
Output |
If the input value is in this range, the output is set to 1 / On. |
Range 4 |
Output |
If the input value is in this range, the output is set to 1 / On. |
Range 5 |
Output |
If the input value is in this range, the output is set to 1 / On. |
Mouseover |
Output |
This output can be used to start an event when the object is moved by mouseover. |
Visible |
Input |
With an off-signal the component unVisible and with an on-signal Visible is switched. |
Text color [ARGB-HEX] |
Input |
The font colour can be changed via this data point (if available). The desired colour is transferred as a character string. It is possible to copy the colour from the brush editor (hexadecimal value without #) in order to be able to change the colour via a text entry. |
Input |
||
Value |
Input |
Here an external value can be fed in. The scale reflects the value accordingly. |