|
<< Click to Display Table of Contents >> Navigation: Components > Display and Signal > Linear Gauge |
The Linear Scale component is used to display parameters or values in linear form. The minimum / maximum value can be set in the Properties under Appearance. The scale is divided into 3 parts, which can be set arbitrarily in color and areas.
Under "Appearance" the minimum and maximum scale values, as well as the different ranges in value and color, can be defined. For larger numbers, the clarity can be improved by a factor. In the line "unit" any text can be inserted, which can be seen below the scale.
Factor = Incoming values are multiplied by the factor.
Data points of the component
Name |
Type |
function |
|---|---|---|
Range 1 |
Output |
If the input value is in this range, the output is set to 1 / On. |
Range 2 |
Output |
If the input value is in this range, the output is set to 1 / On. |
Range 3 |
Output |
If the input value is in this range, the output is set to 1 / On. |
Range 4 |
Output |
If the input value is in this range, the output is set to 1 / On. |
Range 5 |
Output |
If the input value is in this range, the output is set to 1 / On. |
Mouseover |
Output |
This output can be used to start an event when the object is moved by mouseover. |
Visible |
Input |
With an off-signal the component unVisible and with an on-signal Visible is switched. |
Text color [ARGB-HEX] |
Input |
The font colour can be changed via this data point (if available). The desired colour is transferred as a character string. It is possible to copy the colour from the brush editor (hexadecimal value without #) in order to be able to change the colour via a text entry. |
Input |
||
Value |
Input |
Analogue value input. Temperatures, meter readings, velocity etc. |