See what is happening on the DALI line. DALIEye 26 shows every telegram of a DALI line in plain text – 16-bit to control gear and 24-bit to control devices, answers with their meaning. The device scan reads out all addresses and finds lamp failures, duplicate addresses and devices without an address, without changing anything in the installation.
Via the Lunatone DALI-2 IoT. DALIEye works with the Lunatone DALI-2 IoT gateway (also IoT4) via its WebSocket interface (firmware v1.2 or later). The search finds gateways in your own networks, also via VPN. The gateway needs a DALI bus power supply; its status appears in the bus monitor.
The scan changes nothing. The device scan queries every short address 0–63 and reads type, version, levels, groups, random address and memory bank 0 of the devices present. It writes only to the volatile DTR registers and changes no configuration. For 64 devices it takes about 2–6 minutes.
Good to know. The gateway delivers telegrams that are already decoded. Signal quality (bit timing, edges) and bus voltage in volts cannot be measured this way – that requires a measuring device directly on the bus.
Visualisation, tools and hardware for KNX, Modbus & building automation.
Alexander Maier GmbH
Beckstraße 3 · D-69412 Eberbach
+49 (0) 6271.919470 · info@busbaer.de