|
<< Click to Display Table of Contents >> Navigation: Components > Display and Signal > Alarm |
This component is used to visualize an alarm condition. If this component is to be used for acknowledgment, "Send signal on acknowledgment" must be activated. In the event of an alarm, the screen is woken up by moving the mouse.
Data points of the component
Name |
Type |
Function |
|---|---|---|
Aucoustic alarm |
Input |
(De)Activate the audible alarm. |
Alarm audio file (*.wav) |
Input |
If the storage path of a wav audio file is transferred, the component uses this as an alarm. All clients must have this wav file (PCM codec) in the same directory. |
Alarm message |
Input |
Here the disturbance signal is switched on |
Disable operation |
Input |
The input option can be enabled or disabled externally here. |
Mouse via |
Output |
This output can be used to start an event when the mouse is moved over the object. |
Acknowledgement |
Bidirectional |
Alarms can be acknowledged with this output. Feedback is sent back. |
Visible |
Input |
With an off signal the component is switched invisible and with an on signal visible. |
Text color [ARGB-HEX] |
Input |
|
Input |
Properties
Name |
Default value |
function |
|---|---|---|
Alarm Value is On signal |
on |
Alarm triggers at Value On; if not set, the alarm is at Value Off (low / high level) |
Text |
|
Text for the caption of the component |
Flashing speed [ms] |
1000 |
Blink frequency in milliseconds |
Acoustic alarm signal |
on |
(De)Activate the acoustic alarm. |
System beep signal |
on |
If this function is set, an acoustic alarm is output via the PC internal loudspeaker. If it is not set, a sound is output via the sound card. This only works if an acknowledgement option is selected. |
Alarm status |
Undefined |
for test purposes: 0 = undefined, 1 = alarm unconfirmed, 2 = alarm confirmed, 3 = no alarm unconfirmed, 4 = no alarm confirmed |
Change page |
on |
Trigger automatic page change to the page of the alarm component or not. This function must not be active if the alarm component is on the master page. The page change is only executed in server-client mode, not in the editor simulation. |
Send signal on confirmation |
|
Sends a signal via the data point "Acknowledgment" when the alarm has been acknowledged |
Confirmation on alarm triggered |
on |
"Alarm triggered" must be acknowledged if this option is selected. |
Confirmation on alarm ended |
|
"Alarm Complete" must be acknowledged when this option is selected. |
Background - Alarm |
red |
Sets the appearance. |
Background - No Alarm |
green |
Sets the appearance. |
Background - Not acknowledged |
yellow |
Sets the appearance. |
Background - Undefined |
purple |
Sets the appearance. |
Activate EisBaer |
|
When an alarm is triggered, the EisBaer client is activated and placed in the foreground. |
Alarm Audio File (*.wav) |
|
An alternative acoustic alarm can be defined here. |
Valid Audio Wav Codecs
Short name |
Format |
Bitrate |
1 min = |
|---|---|---|---|
11k 8bit pcm |
11.025 Hz 8 Bit PCM |
88.2 KB/s |
646 K |
11k 16bit pcm |
11.025 Hz 16 bit PCM |
176.4 KB/s |
1.292 K |
8k 8bit pcm |
8,000 Hz 8 bit PCM |
64 KB/s |
468,8 K |
8k 16bit pcm |
8,000 Hz 16bit PCM |
128 KB/s |
937,5 K |
Invalid Audio Wav Codecs
Example |
Format |
Bitrate |
1 min = |
|---|---|---|---|
11k ulaw |
11.025 Hz u-law |
88.2 KB/s |
646 K |
8k ulaw |
8,000 Hz u-law; * fixed network quality |
64 KB/s |
468,8 K |
11k adpcm |
11,025 Hz 4 bit ADPCM |
44.1 KB/s |
323 K |
8k adpcm |
8,000 Hz 4 Bit ADPCM |
32 KB/s |
234,4 K |
11 kgsm |
11.025 Hz GSM6.10 |
18 KB/s |
131,8 K |
8k mp316 |
8,000 Hz MP3 16 K |
16 KB/s |
117 K |
8k gsm |
8,000 Hz GSM6.10; * Mobile radio quality |
13 KB/s |
102,5 K |
8k sbc12 |
8,000 Hz Lernout & Hauspie SBC 12k |
12.0 KB/s |
87,9 K |
8k truespeech |
8,000 Hz DSP Group TrueSpeech |
9 KB/s |
65,9 K |
8k mp38 |
8,000 Hz MP3 8 K |
8 KB/s |
60 K |
8k celp |
8,000 Hz Lernout & Hauspie CELP |
4.8 KB/s |
35 K |