|
<< Click to Display Table of Contents >> Navigation: Components > Driver > SNMP > SNMP MIB-Agent |
This component can be used to provide data points that can be queried by an SNMP manager.
properties
The component can be configured via the properties.
Name |
|
function |
|---|---|---|
Channel |
0 |
Here the hierarchy of the data points is determined. |
Local IP |
|
Here, the IP address of the local network interface to be used is entered. |
Agent Port |
161 |
Here, the local port to be used, which is to be used by the component, is entered. |
SNMP Version |
one |
Opens the editor for setting the SNMP version. If V3 is used, the authentication and encryption passwords and the associated protocols can be specified. |
V2 Module Identity |
|
Opens the editor for setting the agent identity. (Only relevant for trap version 2 or 3) |
.0 add to OID |
|
Depending on the remote station an attached 0 is required. |
Driver On/Off |
|
This can be used to set whether the component should be active when the system is started. |
channels
Here the hierarchy of the data points is determined. The object ID of the root node can be freely defined. The object IDs of the subitems are derived from the respective parent node and the settable sub-ID.
In addition, the type of the object is also specified here (only the data type "Container" allows substructures).
In order to make a manager aware of the defined data objects, these can be exported to a MIB file.
Datapoints:
Name |
Type |
Function |
|---|---|---|
Debug |
Output |
Error messages are displayed here. The diagnostic information is displayed there, linked to the [Signal] input of the log window. |
Driver On/Off |
Bidirectional |
Driver on or off. |
Dynamic |
Folder |
Contains the data points of the created channels. |
- 1.3.6.1... |
Input |
Here the corresponding value inputs are created for each defined data point (NOT container!). If a value is sent to the component via the SPs, the internal data structure is updated. The manager must explicitly request this to get the new values. For important messages, the SNMP Trap Agent component should be used, as messages can be sent asynchronously to the manager. |
Driver Datapoints
The data point window displays all SPs and the associated object ID.