Driver

You need this driver to operate the touch screen.
You need this driver to operate the touch screen.
Driver Windows 7x64, Windows 7x32, Windows XP

Touchcontrollertreiber - URTC - Liyitec
for Windows 7x86 and Windows 7x64

for CMS and ModBus RTU

The USB-Nano-485 changes signals between USB and RS-485. The device is specially designed for the two wire RS-485-bus. For this reason there are no confusing attachment and configuration settings.
The attachment is not complicated and debugging is simple in case of communication problems. The LEDs are shows: Power (yellow), Rx (green) and Tx (red).

Because of the extremely small dimensions the USB-Nano-485 is particularly usable for mobile use at notebooks. Stationary applications are however likewise possible.
For the RS-485 plug you can get a casing if needed to build your own connection cord.

Technical Data

RS-485: 2-wire , up to 32 bus participants
data rate : up to 3 MBit/s
cable length : up to 2000m (at 128 kBit/s)
power consumption: 70mA (via USB port) no additional current supply necessarily
size: 12x20x74 (without plug)

USB To Serial driver 32Bit RS485 Converter
for CMS and ModBus RTU

WARNING only use Windows 7. There are no Windows 8 driver

USB To Serial driver 64Bit RS485 Converter
for CMS and ModBus RTU

WARNING only use Windows 7. There are no Windows 8 driver

Handbuch EisBaer MBUS-Modbus Gateway

NMU (Node Management Utility) is the free Windows/Mac application used to manage compatible ENTTEC DMX over Ethernet nodes. NMU bypasses all your TCP/IP settings allowing you to reconfigure nodes in a plug and play fashion, how ever they are configured

Weinzierl - KNX IP Router 750

Technical specification Weinzierl Router 750

Weinzierl - KNX IP Router 750

Manual for Weinzierl Router 750

Weinzierl - KNX IP Interface 730

Technische specification Weinzierl Interface 730

Weinzierl - KNX IP Interface 730

Manual for Interface 730

Weinzierl - KNX IP Router 750

Product data baseVD2 for Router 750 (Update: 11.02.2009)

Weinzierl - KNX IP Interface 730

Product data base VD2 for Interface 730 (Update: 07.11.2008)