Current component

Output

Output of the component name that is currently selected for output.

Clear display (protocol window)

Output

Connection to the protocol window "Delete display", if this component is used.

Known components (list selection)

Output

Connection to the list selection "Import data from string

Debug output (entries of the selected component)

Output

Connection to the protocol window "Input (Signal)" (recommended) or another component that can display text.

Debug input

Input

Connection to the diagnostic outputs of the components listed above. All components use the same network.

Dynamic

Folder

Diagnostic outputs of any components are linked here. An entry must first be created under Channels for each diagnostic output. Each component must be linked with its own network.

Messages received per second (averaged over 10s)

Output

Number of messages received from all linked drivers per second, averaged over 10 seconds.

Messages sent per second (averaged over 10s)

Output

Number of messages sent by the selected driver, averaged over 10 seconds.

Select component

Input

Link to the "Selected value" list selection

Delete (All messages)

Input

Deletes all debug messages from all drivers.

Delete (messages of the current component)

Input

Deletes all debug messages from the currently selected driver.

Save messages in files

Bidirectional

If this is set, the logs of all components are saved automatically. Storage location: C:\ProgramData\Alexander Maier GmbH\EisBaer 3.0\Debugger\

Channels

0

A channel must be created for each diagnostic output that is to be switched via the debugger.

Number of messages per channel

100

It can be defined how many messages are to be kept per driver.

Add timestamp

X

To be able to output the real time of the information, the time stamp of the message is added. The time stamp should then be deactivated in the protocol window.

Save messages to file

If this selection is set, the protocols of all drivers are automatically saved.

Storage path

Default storage location: C:\ProgramData\Alexander Maier GmbH\EisBaer 3.0\Debugger\

Auto Backup

never

A backup routine can be set for the selected period.

Zip Backup

Set to zip the backup file.

Send all messages as a unit (on receipt)

If active, when a new message is received for the currently selected sender, all associated messages are sent as one string if no log window is used for display.

Send all messages as a unit (on change of station)

If active, all associated messages are sent as one string when the sender is changed, if no protocol window is used for display.